CLOSE THE PIVY CHAIN LATCHES
Swing open all of the latches on the Pivy Chain and push all cables into the raceway opening, pulling any slack downward. Working from top to bottom,
close all chain latches by pressing down with your thumbs on the center of each latch until you feel a click.
8
A
A
A
A
SECURE CABLES AT THE BASE, TEST THE FULL
RANGE OF MOTION
Secure your cables at the bottom of the Pivy Chain, at the
Desk Foot and on the floor using the CleverCord Mounted Cable
Ties and CleverCord Cable Wrap Ties as needed. Move
the Desk/Table down and up to test over the full range of motion to
ensure that the mechanism and all of your desk components move
smoothly, without any interference, binding, snagging or pinching.
CAUTION: The CleverCord Mounted Cable Tie adhesive is
permanent, and can pull off paint or furniture finish when removed.
9
C
D
C
D
ADDING, REMOVING OR MOVING CABLES
Pop open all of the Pivy Chain Latches (Step ), release
any cable management ties as needed. Add, remove, and move
cables as desired, then repeat Steps through .
4
5
9
Thank you for your purchase!
For Technical Support, Feedback or
Customer Service:
+1.888.861.1704
www.QualityClever.com
https://
Patent Pending
PivyCord, Pivy, CleverCord and Quality Clever
are Registered Trademarks
INSTALL VIDEO
