OPEN ALL CHAIN LATCHES
Make sure all of the Latches on the PivyCord Chain are open. To open a latch, insert
the tip of a small Flathead Screwdriver into the slot underneath the Latch on the side
with the open icon. Push downward on the handle to pop the latch open.
CAUTION: When handling the PivyCord Chain, be careful to avoid the pinch-points on the back side
of the chain that can pinch fingers and skin. Keep away from Children.
4
A
B
A
B
SNAP THE UPPER AND LOWER MAGNET BRACKETS OF THE PIVY
CHAIN IN PLACE
Confirm the correct UP/DOWN orientation of the Pivy Chain with the
“THIS SIDE UP” and “THIS SIDE DOWN” markings. Snap the Upper Magnet Bracket of
the Chain in place on the Upper Striker Plate then snap the Lower Magnet in place on
the Desk Foot.
5
THIS SIDE UP
THIS SIDE DOWN
THIS S
IDE DO
WN
A
A
UPPER
LOWER
A
UPPER
CHAIN
SECTION =
18 LINKS
LOWER
CHAIN
SECTION =
29 LINKS
PULL ALL CABLE ENDS THROUGH
THE HOLE IN THE CENTER LINK OF
THE PIVY CHAIN
Depending on your setup, some cables will be
easier to pull up from the bottom and others will be
easier to feed down from the top.
6
A
A
Center
Link
C
D
SECURE ALL CABLES ON THE DESKTOP AND UNDERSIDE OF THE DESK
Connect all cables to your desktop equipment. Use the CleverCord® Mounted Cable Ties and
CleverCord® Cable Wrap Ties to route and secure the cable bundles to your desktop and to the
underside of your desk. If you will be using a Quality Clever Cable Tray (sold separately) on the underside of
your desk, install it now as well.
CAUTION: The CleverCord Mounted Cable Tie adhesive is permanent, and can pull off paint or furniture
finish when removed.
7
TOP OF DESK
UNDERSIDE OF DESK
C
D
