Qualitrol INFORMA PMD-A, Руководство пользователя

Страница: 40 / 248

Components and Specifications
33
www.qualitrolcorp.com
Note Wire Gauge to be used at TB8 (PPS Out/In): 14–26 AWG.
3.8.3. Ethernet Connections
INFORMA PMD-A supports two types of Ethernet connections, a 10/100 Base-T that is
operated at a speed of 10/100 Mbit/second, and a 100 Base-FX that is operated at a speed
of 100 Mbit/second.
• The 10/100 Base-T connection is done through the RJ45 socket and is used for short-
range communication over standard twisted pair cables. INFORMA PMD-A has two
RJ45 Ethernet ports, one each on the front and the rear panel, referred to as Ethernet
port 1 and Ethernet port 2, respectively.
•
The 100 Base-FX connection is done through two ST fiber connectors and is used for
longer-range communication over fiber optic cables.
• The white connector is used to transmit and the grey connector is used to receive. The
connectors are suitable for 62.5/125 micron multi-mode fiber cable. The wavelength
used is 1300 nm. The user can find the ST-fiber connectors on the rear panel of the
device.
Figure 3.25 – INFORMA PMD-A PPH/PPM
INFORMA PMD-A can be assigned an IP address statically or dynamically (by setting
“DHCP status” as “DHCP Client”).
The default IP address used by Ethernet port 1 is 192.168.0.11.
Ethernet port 2 uses a default IP address until the user changes the default IP address
(192.168.1.11) to any other IP address.
In addition, INFORMA PMD-A has the capability to act as a DHCP server (by setting “DHCP
status” as “DHCP Server”), in which the user can assign a range of IP addresses that can be
allocated to other devices connected to the network.
3U
6U