Qualitrol INFORMA PMD-A, Руководство пользователя, Страница: 109 / 248

Configuration
102
www.qualitrolcorp.com
6.2.6. EN 50160 reports (standard threshold and user threshold)
EN 50160 Report with Standard Limits (For Busbar 1)
The EN 50160 report is based on 10-minute average values (except for frequencies that use
10-second values). Each parameter value is checked against its limits and is used to
increment the ‘total’ tally count or a ‘bad’ tally count accordingly. The report provides a
tabular summary of these tally counts across a reporting period of one week. Parameter
limits are defined in the standard.
Figure 6.23 – EN 50160 Standard Report – Standard Limits (Busbar 1)
EN 50160 Report with User-Defined Limits (For Busbar 1)
The EN 50160 is based on 10-minute average values (except for frequencies that use 10-
second values). Each parameter value is checked against its limits and is used to increment
the ‘total’ or ‘bad’ tally count accordingly. The report provides a tabular summary of these
tally counts across a reporting period of one week. The user can configure the parameter
limits; therefore, this report is not restricted to the limits specified by the standard.