background image

6

SET RINGER VOLUME                                                                                                                     

There are three selectable ringer volume levels:

HIGH

,

LOW

 and 

OFF

. At the back of the base of the phone, 

locate the ring switch and set it to the required ring level. 

LCD BACKLIGHT FUNCTION                                                                                                                                           

The backlight is turned on upon receiving calls, dialing, pressing any key or in 

HOLD

 mode. It will fade off if the 

telephone is left idle for 6 seconds. 

Note:

    This feature is available only if batteries are inserted in the battery compartment located at the back of 

the base of the telephone. (3 x AAA / 1.5V batteries required) 

WALL MOUNTABLE                                                                                                                                                       

The telephone can be wall-mounted. 

NOTES                                                                                                                                                                 

Please unplug the telephone line cord when installing or replacing batteries. 

MAINTENANCE                                                                            

The instrument should be stowed in a dry and clean environment to avoid damage to the inner parts. 

Use a damp cloth for cleaning. Do not use liquid cleaning material nor an aerosol. 

Should this product become faulty, do not disassemble the product. Refer servicing to a qualified service 

facility. 

GENERAL INFORMATION                                                                                                                                                       

This analogue telephone complies with the following harmonized standards and directives for 

telecommunication terminal equipment. 

Safety:

 EN60950-1 : 2006 

  + 

A11 

2009 

  + 

A1 

2010 

  + 

A12 

2011 

  + 

A2 

2013 

EMI:

 EN55022 : 2010 

 

  EN55024 : 2010 

The CE symbol may be applied to this product. 

For further information on this product visit the following website:   

www.qualitel.co.za 

Отзывы: