Qualitel QT2511, Инструкция по эксплуатации

Страница: 4 / 7

3
GET STARTED
1. Insert 3×1.5V AAA batteries into the battery compartment. Take note of the polarity as indicated. The
LCD will display year, month, date and time.
2. Connect the handset to the base of the telephone by means of the curly cord. Refer to the previous page,
No. 14, to ensure that the curly cord is plugged into the correct connector on the base of the phone.
3. Insert one end of the line cord into the line socket underneath the base and the other end to the wall
socket from the service provider. Refer to the previous page, No.15, to ensure that the line cord is
plugged into the correct connector on the base of the phone.
RECEIVING A CALL
1. Upon receipt of an incoming call, the telephone will ring and automatically detect the callers’ number (*).
The LCD displays the phone number together with the date & time, NEW icon and a serial number. For
repeat incoming calls, the LCD displays “ REP ”. When a callers’ number is withheld the LCD displays
“… p …”. When an error is detected the LCD displays “… E …”. If the incoming call is from an area
without Caller ID service, LCD displays “… o …”. The OUT is displayed when reviewing the outgoing
number. When the incoming memory is full, the latest incoming number is always replaced by the oldest
number.
2. Pick up the handset and talk to the other party.
3. Return the handset to the base to end the conversation.
Notes: Generally the Caller ID signal from the service provider is between the first ring and the second ring.
Answer the phone after the second ring.
(*)
For the phone to display incoming numbers and other information, you must have an active Caller ID
subscription with your local service provider.
INITIATING A CALL
1. Pick up the handset;
2. Upon receipt of dial tone, dial the desired number. The call duration timer will start after 6 seconds;
3. To end the conversation, return the handset to the base.
Redial function
Press [REDIAL] , the previously dialed number will be dialed again.
REVIEWING, CALLING BACK AND DELETING INCOMING CALLS
Call Back Received Calls
Review the desired number and press the [BACK] or [REDIAL] key to dial back the number displayed on the
LCD, then pick up the handset to converse. If the line is busy, press the [REDIAL] key to dial out the number
repeatedly.
Review Incoming Call Numbers
1. In on-hook state.
2. Press the [UP] key, the LCD displays the last incoming call number.
3. Press the [UP] or [DOWN] key to review the incoming call numbers, LCD displays …END… after all
records have been displayed.
Note: Press and hold the [UP] or [DOWN] key for 3 seconds, to quickly browse through the incoming call list.
Calling Back a Long Distance Number
If the LCD displays a number which is known to be a long distance call, press the [BACK] key twice, the phone
will automatically add “0” before the number and dial out the number and display it on the LCD, pick up the
handset to converse. If the line is busy, press the [REDIAL] key to dial the number repeatedly.