Qualitel C33R, Руководство пользователя, Страница: 9 / 13

Help
The Repeater LED continues to flash on and off after the registration process has been completed
• The registration process was not successful. You will have to repeat the registration process again with the telephone base station
concerned. De-register the Repeater, see page 9 and register it to the base station again, see page 5.
The Repeater LED continually flashes on and off when placed/mounted in the desired location
• The radio connection is very weak/poor. You will have to find another location where the signal from the telephone base station is
better.
• The Repeater may have been reset. If this is the case it will have to be registered to the telephone base station again.
The Repeater LED does not light up at all
• There is no power to the Repeater. Check that the power adaptor lead is plugged into the Repeater, the power adaptor is plugged
into the mains socket and the mains power is switched on.
The audio quality is very poor/noisy when in the Repeater reception area
• The radio connection is very weak/poor. You will have to find another location where the signal from the telephone base station is
better.
• Move the Repeater closer to the telephone base station.
• Make sure the Repeater is not too close to metal objects or thick walls.
• Check for interference from electronic devices.