Qualitel C33R Скачать руководство пользователя страница 4

Страница: 4 / 13

Automatic registration to the telephone base station

1. Before beginning registration, make sure that all unregistered Repeaters are switched off.

2. Turn on the Repeater mode in the telephone base station that you will be registering the Repeater to. This varies dependant on

the product, the instruction can be found in the User guide, provided with the telephone base station.

3. Put the telephone base station into registration mode, this is normally done by pressing and holding the

Find

button, but again

consult the User guide, provided with the base station.

4. Switch on the power to the Repeater at the wall socket and the Repeater will register automatically. The LED on the Repeater will

toggle between Red and Blue, followed by a triple blue flash to confirm that registration is complete. The LED will remain blue to

indicate that the registration is complete.

5. You can now safely disconnect the power and move the Repeater to your selected location. The Repeater will remain registered

to the telephone base station.

NOTE

: If the LED continues to flash red, try registering the Repeater again.

Содержание C33R













