5
6
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
Mounting to a Concrete Wall
2b
3 Place concrete anchors (W-B) in each hole. Tap each anchor flush with the wall using a hammer.
Using a socket wrench, mount the wall mount (A) and fasten them with the provided lag bolts
(W-A) and D6 washers (W-C).
Hold the marking template (H) provided against the wall where you want to install the TV,
mark five holes for drilling.
1
NOTE
Do NOT use power drill and do NOT over tighten the lag bolts.
Installing to a Flat Back Panel of a TV
3a
Flat Back
Panel
Top Backside
of the TV
A
Wall Mount
W-A
W-C
W-B
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.7" (70 mm) depth at the marked locations in the previous step.
2
ø 10mm
(ø 3/8")
70mm
(2.7")
70mm
(2.7")
H
Marking Template
QG-TM-032
-BLK
D
Right Adapter Bracket
C
Left Adapter Bracket