9
10
5
Hanging the TV onto the Wall Mount
NOTE
Tighten all screws but
do NOT over tighten.
Top of the
TV
Back of the
TV
G/ I/ K/ M
D
E
Choose the appropriate screws according to the type of
your TV, add shims (E) and spacers (D) if necessary, then
attach the VESA plate to the back of the TV and tighten
screws using a screwdriver.
HEAVY!
Use an assistant for this step.
Using an assistant, hang the TV onto the wall bracket as shown above.
While holding the TV securely by an assistant, ensure the VESA plate screws are tightened
by using a screwdriver.
Wall
TV
VESA Plate Screws
Wall
TV
7
Adjusting the TV
NOTE
Tighten all bolts and
screws after adjusting
the TV.
Tension was preset at the factory. To adjust tension,
loosen or tighten arm adjustment bolts using allen key (N)
and wrench (O). TV or monitor can be adjusted to desired
location by tilting and swiveling the bracket.
TV
Bracket
N
6
Connect the cables to your TV,
and run the cables through the
cable clip.
Wall
TV
Cable
NOTE
Leave slack in the
cables for cantilever
arm movement.