5
6
WARNING
Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
NOTE
Do NOT use power drill and do NOT over tighten the lag bolts.
Do NOT use concrete / brick anchors (B) for drywalls.
Mounting to a Concrete or a Brick Wall
2b
Using a power drill and a 3/8" masonry drill bit, drill mounting holes of 3/8" (10 mm) diameter
and 2.7" (70 mm) depth at the marked locations in the previous step.
Hold the marking template provided against the wall where you want to install the TV, mark
three holes for drilling.
1
5
Marking Template
Level
2
3
ø 10mm
(ø 3/8")
70mm
70mm
(2.7")
(2.7")
SKIP TO STEP 3
Wall Plate
A
C
C
A
B
Mount the wall plate and tighten with the provided lag bolts (A) and D6 washers (C)
using a socket wrench.
Place concrete anchors (B) in each hole. Tap each anchor flush with the wall using a hammer.
Mount the wall plate and tighten with the provided lag bolts (A) and D6 washers (C) using
a socket wrench.
Concrete Wall