4
Disconnecting the Projector Plate from the Projector Mount
7
Joining the Pipe to the Ceiling Adapter
3
IMPORTANT!
Do not loosen screws all the way when making adjustments, this
may disconnect the parts and may cause injury or property damage.
Using Allen Key (I), tighten screws (L or M)
onto the pipe and secure the position.
To connect the 3-Inch NPT pipe to
the ceiling adapter, twist the male
threaded end of the pipe into the
female thread on the adapter.
Ceiling
1
±45°
The Vaulted Ceiling Adapter
allows tilt angle adjustments
of ±45°.
Allen Key
(I)
2
3-Inch NPT Pipe
Connecting the Pipe to the Projector Plate
4
8
To connect the 3-Inch NPT pipe (D) to the projector plate,
twist the male threaded end of the pipe into the female
thread on the projector plate.
Allen Key
(I)
Set Screws (L)
Front
3-Inch NPT Pipe (D)
Projector Plate
Using Allen Key (I), insert and tighten set screws (L)
to secure the position.
WARNING
Installers are responsible for providing hardware for other types of mounting situations.
Installers must verify that the supporting surface safely supports the combined weight of
the equipment and all attached hardware and components.
"
Projector Plate
Slide the projector plate out from the
projector assembly as shown on the
right to disconnect the projector plate
from the projector mount.
Projector Mount
