3
4
4
Using a power drill and a 5/32" wood drill bit, drill holes of 5/32" (4mm) diameter, and 2.5" (65mm)
depth at the marked locations.
Drill Depth
65mm
(2.5")
Drill Diameter
ø 4.0mm
(ø 5/32")
Mounting to a Vaulted Concrete Ceiling
1b
1
Using wall marking template (B), mark on the concrete the locations of where you want to mount
the ceiling adapter.
QG-PRO-PM-VCA-B or
QG-PRO-PM-VCA-W
W
AL
L MARKING
TEMPL
AT
E
Make sure that the drilled holes
are free of dust for proper
installation of anchors.
TIP
1
2
QG-PRO-PM-VCA-B or
QG-PRO-PM-VCA-W
W
AL
L MARKING
TEMPL
ATE
3
Using wall marking template (B), mark on the center of the stud the locations of where you want to
mount the ceiling adapter.
Mounting to a Vaulted Wooden Joist or Wooden Stud Ceiling
1a
For concrete ceiling mounting,
follow step 1b.
NOTE
Using a straight edge, mark the centerline
of the stud.
Using an edge-to-edge stud finder, find the
edges of the stud.
SKIP TO STEP 2
Stud Finder
Depending on the direction of the studs, choose the
mounting holes accordingly.
centerline of the stud
centerline of the stud
