Qualcut CS4600 Garden Master Series, Руководство по эксплуатации

Страница: 12 / 28

!
!
POWER PRODUCTS LLC.
CS4600
To Test Chain Brake
Fuel
5L Fuel = 125ml 2 Stroke Oil = 40:1 Ratio
Use regular grade unleaded gasoline mixed with 40:1 custom 2 cycle engine oil for best results. Some conventional
gasolines are being blended with oxygenates such as alcohol or an ether compound to meet clean air standards. The
engine is designed to operate satisfactorily on any gasoline intended for automotive use including 96 Octane gasolines.
FUEL AND LUBRICATION
WARNING: Never use straight gasoline in your unit. This will cause permanent engine damage and void
the manufacturer’s warranty for that product. Never use a fuel mixture that has been stored for over 90
days.
Chain and Bar Lubrication
Always refill the chain oil tank each time the fuel tank is refilled. We recommend using our replacement Chain & Bar.
Always use good quality Chain bar / Lube Oil, which contains additives to reduce friction and wear and to assist in the
prevention of pitch formation on the bar and chain.
WARNING: 2 cycle lubricant must be a premium grade oil for 2-cycle air cooled engines mixed at a 40:1
ratio. Do not use any 2-cycle oil product with a recommended mixing ratio of 100:1. If insufficient lubrication
is the cause of engine damage, it voids the manufacturer’s warranty.
10.