Qualcast YT6702), Сборка, использование, руководство по обслуживанию

Страница: 59 / 69

58
EN
SAFETY INSTRUCTIONS
replacement parts and accessories.
i) When the machine is stopped for
servicing, inspection, or storage,
or to change an accessory, shut
off the power source, disconnect
the machine from the supply and
make sure that all moving parts
are come to a complete stop. Allow
the machine to cool before making
any inspections, adjustments, etc.
Maintain the machine with care
and keep it clean.
j) Store the machine out of the reach
of children.
Recommendation
The machine should be supplied via
a residual current device (RCD) with
a tripping current of not more than
30mA.
Avoid using the machine in bad
weather conditions especially when
there is a risk of lightning.
You should only use extension cords
for outdoor use, PVC ordinary duty
with a cross sectional area not less
than 1.0mm2 for extension cord up to
15 meters and 2.5 mm2 for extension
over 15 meters but less than
40 meters.
Vibration and noise reduction
To reduce the impact of noise and
vibration emission, limit the time of
operation, use low-vibration and low-
noise operating modes as well as wear
personal protective equipment.
Take the following points into account
to minimize the vibration and noise
exposure risks:
1. Only use the product as intended by
its design and these instructions.
2. Ensure that the product is in good
condition and well maintained.
3. Use correct application tools for
the product and ensure they in
good condition.
4. Keep tight grip on the handles/
grip surface.
5. Maintain this product in
accordance with these instructions
and keep it well lubricated (where
appropriate).
6. Plan your work schedule to spread
any high vibration tool use across a
number of days.
Emergency
Familiarize yourself with the use
of this product by means of this
instruction manual. Memories the
safety directions and follow them to
the letter. This will help to prevent
risks and hazards.
1. Always be alert when using this