background image

from the discharge opening. 

 Before you attach or empty the grass collector, switch off the motor and 

wait until the blade has come to a standstill. 

 The safety distance from the moving blade produced by the push handle 

must be maintained at all times. 

 If you use the mower on a slope, mow across the slope (not in an up and 

down direction). Always be sure of your footing on slopes.   

 Do not use the lawn mower on gradients of over 15

 

degree. 

 Before you lift the lawn mower to transport it, switch off the motor, 

disconnect the mains lead and wait until the blade has come to a 
standstill. 

 When the mower is working ensure that nobody, particularly children and 

animals, is in the immediate vicinity of the lawn mower. Ensure that you 
keep everybody 10 meters away from the mower when it is working. 

 Keep the lawn mower in a dry place which is inaccessible to children. 

 Repair work on the electrical parts of the lawn mower may only be carried 

out by an electrician. 

 Extension cables must comply to H07RN-F requirements as described in 

DIN 57 282/VDE 0282 and must have a minimum cross-section of 1.5 
mm

2

. The plug must have an earth and any connection must be 

splashproof. Before use check the cables for signs of damage and ageing. 
Never use the mower if the cables are not in perfect condition (this also 
applies to the motor supply cable on the mower). If the cable is damaged 
whilst the mower is working, disconnect the mains plug from the power 
supply immediately and then check the extent of the damage. 

 When you start the motor, the lawn mower must not be tilted unless the 

grass is particularly long. In this case only tilt it up as far as is really 
necessary and only raise the side that is furthest away from the user. 

 If the lawn mower begins to vibrate abnormally, switch it off immediately , 

disconnect the plug immediately and check it carefully. 

 Ensure that all the nuts, bolts and screws are tight and that the mower is in 

a safe condition for use. 

 Switch off the motor and disconnect the plug from the power supply if the 

mower strikes a foreign body. Check the mower for signs of damage and 
carry out the necessary repair work before you start work with the mower 
again. 

 Do not leave the mower out in the rain. The lawn must not be wet or very 

damp. 

 Ensure that you have safe footing at all times whilst working with the 

mower. 

Содержание MEB1234M





















Отзывы: