5
4
Customer Helpline
0845 034 2279
www.gardenservicecentre.co.uk
Customer Helpline
0845 034 2279
www.gardenservicecentre.co.uk
In the Box
Parts
A
A
Lower part with
battery
B
Pole head
C
Intermediate pole
D
Blade protection
cover
E
Shoulder strap
F
Charger
WARNING!
Always take care when removing the packaging to prevent damage to you or to the
pole hedge trimmer.
IMPORTANT!
Before assembling the pole hedge trimmer,check all the parts indicated in the
manual are in the box.Inspect all the parts for signs of damage.Do not assemble the pole hedge
trimmer if you observe any damaged components.
1. Remove all parts of the pole hedge trimmer from the box and carefully remove all packaging.
Take care not to lose any instructions which may be affixed to the parts .These provide important
information which will be required while assembling the pole hedge trimmer.
2. Keep all packaing until the pole hedge trimmer is fully assembled and has been operated
successfully.
NOTE!
Always recycle the packaging in accordance with local recycling schemes.
Assembly
Preparing to Assemble the Pole Hedge Trimmer
B
C
D
F
Step 1 - Connecting the Poles
Before using the pole hedge trimmer, a one-time assembly is required.
1. Remove package material form the box
2. Insert the handle pole (A) into the pole head (B). When inserted the arrow on the pole head
should be aligned with the arrow on the handle pole and must be fully inserted as shown in the
insert of Fig. a
3. Tighten the locking knob in the “LOCK” direction. (IMPORTANT: Must turn the locking knob
tightly.). (See Fig.b)
4 If the intermediate pole (C) is required then the same method should be used to attach the
handle pole (A) and the Pole head (B) to either end of the intermediate pole (C).
a
b
Lock
E
A
C
B