13
Helpline No. UK 0151 649 1500 / IRE 189 094 6244
Helpline No. UK 0151 649 1500 / IRE 189 094 6244
4. Technical data
Engine type:
2-stroke engine, air-cooled,
chrome cylinder
Engine power (max.):
0.76 kW/1.03 hp
Displacement:
29.7 cc
Idle speed of engine:
2900 rpm
Max. engine speed:
11000 rpm
Max. twin line speed:
8000 rpm
Ignition:
Electronic
Drive:
Centrifugal clutch
Weight (with empty tank):
5.8 kg
Long handle length:
135 cm
Cutting circle diameter of line:
Ø 43 cm
Cutting line length:
5.0 m
Cutting line diameter:
2.0 mm
Tank capacity:
0.6 l
Spark plug:
Torch L8RTC
Vibration ahv rear handle:
9.319 m/s
2
Uncertainty of vibration level:
3.7m/s
2
L
pA
sound pressure level:
92 dB (A)
L
WA
sound power level:
112 dB (A)
Uncertainty sound level:
1dB
5. Before starting the equipment
5.1 Assembly
5.1.1 Assembly of the long handle (Fig. D-E)
Remove the transport guard cap from the
lower long handle. Slacken the star grip screw
(Fig. D/Item A) on the connecting piece
on the upper long handle (Fig. D/Item B).
Carefully slide the lower long handle (Fig. D/
Item C) into the connecting piece on the
upper long handle.
When doing so, take care to ensure that
the drive shafts on the insides of the long
handles slide into each other (turn the spool
head gently, if required) and that the lock on
the lower long handle (Fig. E/Item D) latches
securely in the connecting piece.
Now retighten the star grip screw (Fig. D/Item
A). To dismantle, proceed in reverse order.
5.1.2 Fitting the guard hood (Fig. F1–F2)
Attach the safety guard to the lower long handle
(Fig. F1). Screw the safety guard tightly in position
using the screw, washer and locknut (Fig. F2).
5.1.3 Fitting the carrying strap (Fig. G)
The carrying strap is intended to help you
work safely and ergonomically with the petrol
grass trimmer. Hook the carrying strap into the
fastening eyelet (Fig. G/Item 9).
Check that all moving parts move smoothly
before you start using the machine. Check
that all screws are securely fastened and also
check all the safety devices.
5.1.4 Fitting the additional handle (Fig. G1–G3)
Slacken the wing nut on the fastening screw on
the handle (Fig. G1/Item 1). Remove the nut
and the fastening screw (Fig. G1/Item 3) from
the handle clip the additional handle over
the long shaft (Fig. G2). Insert the fastening
screw through the additional handle and then
clamp tightly by fitting the wing nut (Fig. G3).
5.2 Setting the cutting height
• Slip the shoulder strap (Fig. B/Item 17) over
the left shoulder.
• Set the length of the shoulder strap in such
a way that the cutting head runs parallel
to the ground. In order to establish the
optimum length of the shoulder strap,
you should then make a few swinging
movements without starting the engine (Fig. I).
Please note:
Always use the shoulder strap
when using the machine. Attach the strap as
soon as you have started the engine and the
engine is running in idle mode. Switch off the
engine before you take off the shoulder strap.
Check the machine for the following each
time before use:
• That there are no leaks in the fuel system
• That the cutting unit and all safety devices
are in perfect condition
• That all screws are securely fastened
Sound and vibration were measured in
accordance with EN ISO 27917, 10884/7916.
Содержание HQ-PT 3043
