Qualcast GGT600A1, Инструкция по сборке

Страница: 10 / 24

Customer Helpline
0344 801 0979
10
ORIGINAL INSTRUCTIONS
When using the machine the safety rules must be followed. For your own safety and bystanders
please read these instructions before operating the machine. Please keep the instructions safe for
later use.
Warnings:
- Warning. Cutting elements continue to rotate after the motor is switched off,
- Keep extension cords away from cutting elements;
It is recommended that appliances should be supplied via a residual current device (RCD) with a
tripping current of not more than 30 mA.
SAVE THESE INSTRUCTIONS
This appliance is not intended for use by persons (including children) with reduced physical, senso-
ry or mental capabilities, or lack of experience and knowledge, unless they have been given super-
vision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
- Wear protective glasses or goggles;
- Never allow children or people unfamiliar with the instructions to use the machine;
- Stop using the machine while people, especially children, or pets are nearby;
- Only use the machine in daylight or good artificial light;
- Before using the machine and after any impact, check for signs of wear or damage and repair as
necessary;
- Never operate the machine with damaged guards or without the guards in place;
- Keep hands and feet away from the cutting means at all times and especially
General Safety
Personal Safety
Operational Safety
WARNING!
Safety Information
Important - Please read these instructions fully before starting assembly