![background image](http://html1.mh-extra.com/html/qualcast/clht1851d/clht1851d_instruction-manual_3396590005.webp)
Important - Please read these instructions fully before starting assembly
5
Customer Helpline
0845 077 8888
•
Use safety accessories. Safety glasses and ear muffs should always be worn.
•
Do not overreach. Keep your footing secure and balanced at all times.
•
Look after your tools. Keep tools clean and sharp for better and safer performance. Follow the
instructions regarding lubrication and accessory changes. Keep tool handles dry, clean and free from
oil and grease.
•
Disable idle tools. Remove the battery from the tool before servicing and when the tool is not in use.
•
Avoid unintentional starting. Make sure that the switches are in the OFF position before attaching the battery.
•
Stay alert. Watch what you are doing. Use common sense. Do not operate a power tool when you are tired.
•
Check for damaged parts. Before using a tool, check that there are no damaged parts. If a part is
slightly damaged, carefully determine it will operate properly and perform its intended function.
Check for alignment of moving parts, binding of moving parts, breakage of parts, proper mounting
and any other conditions that may affect the operation of the tool. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service facility, unless otherwise
indicated in this manual. Defective switches must be replaced by an authorised service facility. Do not
use a tool if the switch does not turn the tool ON and OFF correctly.
•
Do not charge appliance in rain, or in wet locations
•
Do not use battery operated appliance in rain
•
Remove or disconnect battery before servicing, cleaning or removing material from the gardening
appliance.
•
Use only the battery recommended by manufacturer.
•
Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local requirements for
possible special disposal instructions.
•
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to
the eyes or skin. It may be toxic if swallowed.
•
Exercise care in handling batteries in order not to short the battery with conducting materials such as
rings, bracelets, and keys. The battery or conductor may overheat and cause burns.
•
Be careful of the cords or cables hidden in the hedge or bush.
•
Guard against electric shock. Prevent body contact with grounded objects such as water pipes.
•
Always replace damaged parts with approved, identical parts. Use an authorised service facility to fit
replacement parts.
•
Do not let the tool run unattended. Always wait until the tool has come to a complete stop before
leaving it or removing the battery.
WARNING!
The use of an accessory or attachment, other than those recommended in this manual, may
present a risk of personal injury.
The tool must be used only for its prescribed purpose. Any use other than those mentioned in this manual
will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or
injury resulting from such cases of misuse.
General Safety (continued)
Safety Information