Qualcast CDB30 Скачать руководство пользователя страница 9

  

  

9

8

  

  

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

Customer Helpline 

0845 034 2279

www.gardenservicecentre.co.uk

Operating the Grass Trimmer 

Step 2 - Starting the Engine (continued)

5) Use your left hand to hold the appliance firmly by the rear handle.

6) Pull out the pull cord until you feel resistance. Then pull vigorously 3 to 4 times. When the 

engine ticks over (the engine has ignited).
7) Set the choke lever to the mid-position (HALF CHOKE 

).

8) Pull the start grip (

D

) again quickly and strongly until the motor runs.

9) After about 30 seconds of warming up and getting up to speed you can operate the machine.

2b Start it in warm condition as following steps

1) Set the switch to        .

2) Set the choke lever to (RUN 

).

3) Pull the starter grip (

D

) quickly until engine runs.

2e Running Throttle Position

Hold the trimmer with the right hand on the rear handle and the left hand on the front handle. 

Press and hold the throttle lockout trigger (

E

)and  squeeze the throttle trigger (

F

) as required. 

Keep a firm grip with both hands while in operation. 

The trimmer should be held in a comfortable position with the rear handle about hip height. 
Always operate trimmer at full throttle.

Step 1 - Removing the blade protector

Operating the Grass Trimmer

Remove the blade protector.

Step 2 - Starting the Engine

2a To start a cold engine

1) Lay the machine on a flat surface free of growth. resting it  on the motor and on the protective 

hood.

2) Set START/STOP switch (

A

) to      .

3) Gently press primer bulb (

B

) often enough that no more bubbles are visible (approx. 7 times).

4) Set choke lever (

C

) fully downwards (FULL CHOKE 

).

See quick start videos at www.gardenservice centre.co.uk for more information.

A

Step 3 - Trimming

F

E

Choke will automatically

 

return to 'Run' position 

when Throttle is pressed

Pull cord until motor runs

FULL CHOKE position

HALF CHOKE position

RUN position

1

2

3

4

5

6

7

8

WARNING!

 

- Never operate this unit on the operator’s left side.

C

B

D

1

1

Содержание CDB30















Отзывы: