Quaildigital PRO7, Руководство пользователя

Страница: 5 / 12

Useful Tip Power to the Bases should use a constant 24hr power outlet.
If one or more mains circuits is switched off, it may affect the operation
of the entire Base network.
Follow the Type B wiring
protocol for all RJ45 plugs
Colour code as shown right.
Rules when installing multiple Bases on the same network
•
Ideal height for Bases is between 2 and 4 meters above floor level.
•
The maximum cable length between any two Bases should not
exceed 100m.
•
The maximum cable length between two power sources should not
exceed 200m.
•
The maximum number of Bases a single power supply should support
is four.
•
When ‘mapping’ the premises, as a general rule place the next Base
10m beyond the point where the headset loses range from the
previous Base.
•
It is good practice to label the Cat5 cables that go into the top of the
Base IN and OUT respectively to avoid mis-connection at a later date.
5