Quail Digital Q-HCBS, Руководство пользователя

Страница: 13 / 16

What maximum distance
would you recommend
between base station
and control equipment,
speakers or voice
recorders?
The base station has an unbalanced input and
output and comes with 2 x 4ft 3.5mm cables to
link with external equipment. Cables can be run
for up to 30 ft before balancing transformers
need to be inserted to remove external noise.
Speak to your AV specialist for connection of
external devices.
How do you add external
speakers onto the
system? Two methods are recommended: 1) connect
from Q-HCBS output socket into PC speakers;
2) connect from Q-HCBS output socket to PA
amplifier of your choice and then into ceiling
and wall mounted speakers. Seek advice from
your AV specialist.
What is the input mute? This feature is used to reduce background
noise or hum picked up on long cable runs
when customers use external microphones to
speak into the headset system. The mute
feature will activate when the external device
is engaged (pushed to talk). Your AV specialist
will wire to include the mute feature onto your
devices.
There are 2 SD card slots.
When are these used?
If the system firmware requires upgrading, these
slots accept the SD cards containing the
firmware revision. There is no permanent SD
card in either slot.
What does the reset
feature do? Pressing the reset button for 15 seconds will re-
boot the firmware and clear spurious
interference which may have induced a
robotic or watery sound into the headsets.
13