manualshive.com logo in svg
background image

Quadro6L/4L Manual I: Installation Guide 

 

 

 

Quadro6L/4L; (SW Version 5.2.x) 

Copyright and Trademarks     

Copyright 

©

 2003-2012 Epygi Technologies, Ltd. All Rights Reserved. Quadro is a registered trademark of Epygi Tech-

nologies, Ltd.  Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation. All other 
trademarks and brand names are the property of their respective proprietors. 

Limited Warranty 

Epygi Technologies, Ltd. (‘Epygi’) warrants to the original end-user purchaser every Quadro to be free from physical de-
fects in material and workmanship under normal use for a period of one (1) year from the date of purchase (proof of pur-
chase required) or two (2) years from the date of purchase (proof of purchase required) for products purchased in the 
European Union (EU). If Epygi receives notice of such defects, Epygi will, at its discretion, either repair or replace prod-
ucts that prove to be defective.  

This warranty shall not apply to defects caused by (i) failure to follow Epygi’s installation, operation or maintenance in-
structions; (ii) external power sources such as a power line, telephone line, or connected equipment; (iii) products that 
have been serviced or modified by a party other than Epygi or an authorized Epygi service center; (iv) products that have 
had their original manufacturer’s serial numbers altered, defaced, or deleted; (v) damage due to lightning, fire, flood, or 
other acts of God. 

In no event shall Epygi’s liability exceed the price paid for the product from direct, indirect, special, incidental, or conse-
quential damages resulting from the use of the product, its accompanying software, or its documentation.  Epygi offers no 
refunds for its products. Epygi makes no warranty or representation, expressed, implied, or statutory, with respect to its 
products or the contents or use of this documentation and all accompanying software, and specifically disclaims its qual-
ity, performance, merchantability, or fitness for any particular purpose. 

Return Policy   

If the product proves to be defective during this warranty period, call Epygi Customer Support at (972) 692-1166 to obtain 
a Return Material Authorization (RMA) Number. Registered users also may access Epygi’s Technical Support 
(www.epygi.com; ‘Support’) to send their RMA request. For Brazil representatives, call (21) 2518-3161 or contact via Web 
(www.saga.com.br). Please have your proof of purchase on hand when contacting us.  When returning a product, mark 
the Return Authorization Number clearly on the outside of the package and include your original proof of purchase. Return 
requests cannot be processed without proof of purchase. Customers are responsible for shipping and handling charges 
when shipping to Epygi. 

Epygi or its service center will use commercially reasonable efforts to ship a replacement product within ten (10) working 
days after receipt of the returned product. Actual delivery times may vary depending on customer location. 

Epygi reserves the right to revise or update its products, pricing, software, or documentation without obligation to notify 
any individual or entity. Please direct all inquiries to: 

Epygi Technologies, Ltd., Two Legacy Town Center, 6900 North Dallas Parkway, Suite 850, Plano, Texas 75024 

Representative in Brazil - Saga Sistemas e Computadores SA, Av. Rio Branco, 18 - 8 andar, Rio de Janeiro 20090-001 

Notice to Users 

This Installation Guide, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form 
without prior written approval. 

Epygi provides no warranty with regard to this Installation Guide or other information contained herein and hereby ex-
pressly disclaims any implied warranties of merchantability or fitness for any particular purpose in regard to this manual or 
other such information. In no event shall Epygi be liable for any incidental, consequential, or special damages, whether 
based on tort, contract, or otherwise, arising out of or in connection with this manual or other information contained herein 
or the use thereof. 

FCC Statement (Part 15) Class A 

 

The Epygi Quadro6L/4L has been tested and found to comply with the limits for a class A digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in 
a commercial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause harmful interference to radio communications. How-
ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the aforementioned measures.  

You are cautioned that any change or modification to the equipment not expressly approved by the manufacturer could 
void the user’s authority to operate this device. 

Administrative Council for Terminal Attachments (ACTA) Customer Information 

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the back of this 
equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ###TXXXX, 
made out to HX7OT00BHX70100. If requested, this number must be provided to the telephone company. 

Any plug or jack that is used to connect this equipment to the premises wiring and telephone network must comply with 
the applicable FCC Part 68 rules and requirements adopted by the ATCA.  

The Ringer Equivalence Number is an indicator of the maximum number of devices allowed for connection to a telephone 
interface. The termination on an interface may consist of any combination of devices subject only to the requirements that 
the sum of the RENs of all the devices does not exceed five.  Excessive RENs on a telephone line may result in the de-
vices not ringing in response to an incoming line. The REN for this product is part of the product identifier that has the 
format US:AAAEQ###TXXX, made out to HX7OT00BHX70100. The digits represented by ### are the REN without a de-
cimal point (in this case 00B is a REN of 0.0B.)  

If the Quadro causes harm to the telephone network, the telephone company will notify you in advance that a temporary 
discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the cus-
tomer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is nec-
essary. 

Содержание Quadro4L


























































Отзывы: