Quadro Manual I: Installation Guide
Appendix: Registering on Epygi SIP Server
Quadro2x, 2xi, Quadro4x, 4xi, 4xa, Quadro16x, 16xi; (SW Version 4.1.x)
54
Fig. I-55: Extensions Management - Edit Entry – SIP Settings page
•
Enter the SIP registration number displayed in the column
Ext#
into the text field
Reg-
istration User Name
.
•
In the
Password
field, enter the password you specified when registering at the SIP
server and confirm it in the field below.
•
In
Registration SIP Server,
the selected SIP server address must be entered. If you
use the Epygi SIP server, you may leave the default entry
sip.epygi.com
.
•
Most SIP server providers, including Epygi, use port 5060 as the
Registration SIP
Port
. You may leave the default entry as is.
•
Select
Registration on SIP Server
if you want to establish and receive IP calls.
•
Click the
Save
button to activate the settings.
Other settings of the extension might be also modified from
Extensions Management –
Edit Entry
page (refer to the Manual II - Administrator’s Guide).
Your settings will be verified, then after a few seconds the
Extensions Management
page
is updated with the changes as shown in the below example, Fig.I-56.
Fig. I-56: Extensions Management page
If you go back to Epygi’s SIP Server, you will find the value
reg.
for this number in the col-
umn
Stat
.
Reg
. This will indicate that the Quadro has successfully registered the new num-
ber. If this does not happen after a few minutes, again verify the SIP Number and pass-
words.
Содержание Quadro2x
Страница 1: ......