Quadro PGS-H2028, Руководство пользователя, Страница: 9 / 28

FILLING THE BOILER DURING USE
• When the low water level indication light turns on, the water in the boiler has run out and the
appliance does not generate any steam.
• Unscrew the boiler safety cap, by carrying out the following steps:
- Always turn off the boiler by pressing the boiler switch to “O” position
- Turn the adjustable thermostat to MIN.
- Press the steam button as to let out all the residual steam.
- Turn off the iron by pressing the iron switch to “O” position.
- Remove the plug from the wall socket.
- Allow the iron cool down.
- Slowly unscrew the boiler safety cap and wait for the hissing noise of the steam to stop before
unscrewing it completely.
- Slowly pour 1.0 liters of water into the opening always using the funnel provided.
- Screw the boiler safety cap into place.
- Plug in the appliance and turn it on by following the steps as indicated on the paragraph “Use of
the appliance” in order to continue ironing.
CAUTION : Never attempt to open the cap while the boiler is under pressure.
CAUTION : Never unscrew the boiler cap when the appliance is connected to the outlet.
NOTE : It is not necessary to completely fill the boiler tank for short ironing sessions. One
measure (or less) of water is sufficient as to reduce the waiting time and save electric energy.
• If the iron remains unused for a long period of time (a few weeks), we suggest that you press the
steam button pressed for about 30 seconds holding the iron in horizontal position, so as to clean
the internal steam ducts, before you start your ironing session.
DRY IRONING
• To iron without steam, first connect the appliance to the mains supply.
• Press the iron switch to “-” position and then select the desired temperature by turning the
thermostat knob to the desired temperature. The thermostat indicator light turns on.
• Wait until the thermostat indicator light turns off, indicating that the desired temperature has been
reached. You may start ironing.
• For dry ironing it is not necessary to press the steam button.
CAUTION : Do not iron the cloths while wearing them.
VERTICAL IRONING
• The Vertical Steam system allows you to use the iron for vertical ironing. This is especially useful
for getting wrinkles out of hanging clothes, curtains, wall hangings etc. Hold the iron vertically, in
front of the item to be steamed and press the steam button.
CAUTION : Never direct the steam jet towards other persons, as this may be extremely
dangerous.
AFTER USE
• Turn the steam knob continuously to let out all the residual steam.
• Press the boiler and the iron switches to “O” position.
• Turn the adjustable thermostat to MIN.
• Unplug the power cord.
• Place the iron on the stand rest and allow it to cool down completely.
Attention : Allow the steam generator to cool down completely before storage.
CARE AND CLEANING
• Your steam generator and iron will give the best ironing results and last longer if you apply “self-
cleaning” regularly (once or twice a month) to remove any scaling or fluff.
- 8 -
ENGLISH