7. Solder XT-‐60 pigtail to PDB; red lead to positive pole, black lead to negative pole. (Remove vinyl stand-‐offs one
side at a time when attaching pigtail.) Install 5V drop-‐down to power Naze32; this can be sandwiched between
the Naze32 and the PDB with double-‐sided tape. Install Naze32 board on second tier stand-‐offs; secure with nylon
nuts.
8. Mount FPV cam to camera plate using double-‐sided tape. Camera angle can be adjusted using the slots in the
Base and Top plates.
9. Install signal wiring
per diagram at right.
