QuadRevo uFR1 – Parts List and Assembly Instructions
Parts List:
Part Description:
Quantity:
uFR1 Base Plate
1
uFR1 Top Plate
1
uFR1 FPV Cam Mount Plate
1
35mm Hex Pv standoff – female/female
6
10mm Hex Pv standoff -‐ female/female
4
10mm Hex Pv standoff – female/male
8
M3 Pv Nuts
8
10mm M3 Hex Machine screw
20
Recommended:
PDB/OSD: QuadRevo PowerOSD V2 NTSC
1
FC: Naze32 Acro
1
Motors: DYS BX1306 – 3100KV – CW/CCW
4
ESC: DYS SN20A OPTO BLHeli
4
Rx: FrSKY D4R-‐II
1
FPV Cam: HS1177 1/3 Sony HADII CCD 2.8mm
1
Vid Tx: AOMWAY 5.8Ghz 200mW
1
Assembly Instructions:
1. Mount landing gear to bottom plate using M3
machine screws. Next, mount motors onto Base
Plate. If motors are CW/CCW, be sure to place
motors such that correct flight rotation tightens
the nut.
2. Using the zip-‐tie holes as a guide, trim motor leads to appropriate
length for direct connection to ESC.
3. Remove heat shrink and existing black leads from ESCs.
