The Trusted Source
®
5
Bike Rack Assembly:
Assemble the top and bottom tube assemblies as shown with the pinch clamp (G)
in between the two tubes (D & E). Secure the two assemblies with a M8x50 bolt (H),
(2) M8 Washers (L) and a M8 nylock (M). Tighten with the supplied hex key and
combination wrench. Finally, tighten the pinch clamp bolt with the 5mm hex key.
(FIG4)
Attach the 2nd hanger (C) to the top of the Upper tube (E) with (2) M8x 50 bolts (H),
(1) hanger bracket(F),(4) M8 washers(L),(2) plastic washers (K) and (4) nylocks (M).
Assembly steps are the same as on the lower tube. (FIG3)
FIG3
C
E
H
N
F
O
M
L
L
L
K
K
G
N
O
M
E
E
D
H
L
L
FIG4
Pinch
Bolt
KRI_STANDING_RACK_INST_A4.qxp_A4 6/6/19 10:39 AM Page 5
