Quadratec 92034.1009 Скачать руководство пользователя страница 2

The Trusted Source

®

2

ALWAYS FOLLOW ALL SAFETY WARNINGS, CAUTIONS AND NOTICES
IN THE INSTALLATION INSTRUCTIONS AND DOCUMENTATION THAT
CAME WITH YOUR BIKE RACK. THIS DOCUMENT ONLY REFERS TO
BIKE RACK ASSEMBLY AND INSTALLATION. 

MAKE CERTAIN BICYCLES ARE PROPERLY SECURED. FAILURE TO
DO SO COULD CAUSE PROPERTY DAMAGE OR PERSONAL INJURY.

ALWAYS LOAD RACK EVENLY TO PREVENT TIPPING. 
DO NOT OVERLOAD. OBSERVE MAXIMUM CAPACITY OF 65 LBS. 

Before You Begin Installation: 

Congratulations on your purchase of
Bike Rack. When unpacking, check to
make sure all parts are included and
not damaged due to shipping.

If any part is missing or broken, please
call Customer Service at 800-745-6037
as soon as possible.

Regarding Bike Rack Safety: Always
check that the rack and bicycles are
securely mounted. Failure to do so
could cause property damage or
personal injury.  

Thank you again for your purchase
and let’s start the assembly process.

a hazardous situation which, if not avoided, could result in death or
serious  injury.  You  CAN  be  KILLED  or  SERIOUSLY  HURT  if  you  don’t
follow instructions.

a hazardous situation which, if not avoided, could result in minor or
moderate injury. You CAN be moderately HURT and also may suffer
property damage if you don’t follow instructions. 

Careful attention is required to this instruction or operation but does
generally  not  relate  to  personal  injury.  Damage  to  your  Quadratec

®

product or other property may result if you don’t follow instructions. 

A Few Words About Product Safety: 

Your 2 Bike Vertical Storage Rack is
intended to enhance your bicycling
lifestyle. Before installation, please take
a moment to review the following safety
information and installation instructions 

Important safety information is
generally preceded by one of three
signal words indicating the relative risk
of injury. The signal words mean:

KRI_STANDING_RACK_INST_A4.qxp_A4  6/6/19  10:39 AM  Page 2

Содержание 92034.1009









Отзывы: