The Trusted Source
®
6
Bike Rack Installation:
Using the provided loose retaining strap,
(with eyelet) (G) loop the strap around
the bottom crossbar of the rack and
through the wheel and secure it to the
buckle at the bottom of the rack.
(FIG11)
Adjust the angle of the bike rack arm if
needed. The arm should be angled up
slightly. Position the Bike cradles as
needed for your bike and snug the Allen
bolts with a 5mm hex wrench. Final
adjustment of the bike cradles can be
made later when bikes are installed.
(FIG12)
Attach the tailgate retaining straps to
the bottom of the tailgate on both sides
and tighten the buckles. (FIG9)
Excess strap can be stowed using the
attached hook and loop retainers.
(FIG10)
FIG9
FIG10
FIG11
FIG12
KRI_HANGING_RACK_INST_A4.qxp_A4 6/10/19 11:25 AM Page 6
