The Trusted Source
®
5
Bike Rack Assembly & Installation:
Locate the cross brace and install it
between the retaining arms. Secure both
sides with a button head bolt 2 washers
and a nylock nut. Tighten with a 4mm
hex key and a 10mm wrench. (FIG5)
Place the rack over your spare tire. The
width of the rack and the location of the
retaining straps can be adjusted to mul-
tiple locations depending on the size of
your tire. Adjust the width of the rack
so that it fits snugly over the tire. The
retention strap buckle should be located
near the middle of the tread. (FIG6)
Install the supplied foam pads (D) on the
rack where it contacts the sides of the
tire. (FIG7)
Loop the spare tire retaining strap (H)
through the buckle, around the tire and
thread it back through the retaining
buckle on opposite side. Snug the strap.
(FIG8)
FIG5
FIG6
FIG7
FIG8
Note that the
retaining arms
should be angled
to press firmly
against the tire.
KRI_HANGING_RACK_INST_A4.qxp_A4 6/10/19 11:25 AM Page 5
