Quadratec 12057.014 Series, Руководство по установке

Страница: 8 / 12

The Trusted Source
®
8
Fog Light Installation on QRC Bumpers: Sport Model Vehicles
FIG21 shows the bumper mounting
configuration for your fog lamps.
You will be using three holes just as the
factory original did. Hold fog lamp in place and loosely
attach to bumper with two 4mm button
head screws and two washers using
the provided 2.5mm hex key. (FIG22)
Lastly, from the backside loosely install
the final 4mm button head screw with
a washer on both sides and secure
with 4mm nut using the provided
2.5mm hex key and a 7mm socket.
(FIG23)
Tighten all fasteners once the fog lamp
is in position. Please repeat steps on
the opposite side.
FIG21 FIG22
FIG23
QRC_F_BUMPER_JL_12057_014X_LTR.qxp_Layout 1 10/17/18 3:38 PM Page 8