The following table lists the available and unavailable custom functions of this flash.
C.Fn: Setting Custom Functions
SHOOT Function Settings
Press the <
MENU
> button to enter C.Fn SHOOT.
Press the <
SET
> button to choose one-shoot or multi-
shoots, and press the <
MENU
> button again to back to
the main menu.
One-shoot:
When shooting, choose one-shoot. In the
M and Multi mode, the master unit only sends
triggering signals to the slave unit, which is suitable
for one person photography for the advantage of
power saving.
Multi-shoots:
When shooting, choose multi-shoots,
and the master unit will send parameters and
triggering signals to the slave unit, which is suitable
for multi person photography. However, this function
consumes power quickly.
APP:
Only send triggering signal when camera is
shooting (control the flash's parameters by
smartphone APP).
C.Fn Ver 9.2
GROUP
LCD
SYNC
APP
CLEAR
SHOOT
Setting Signs
ON
OFF
ON
OFF
1/128
1/256
12sec
OFF
ON
IN
OUT
5 (A-E)
16
(
O-F
)
-3-+3
Settings and Description
ON
OFF
ON
OFF
The minimum output is 1/128
The minimum output is 1/256
Off in 12 seconds
Always off
Always lighting
Enable Navigator X2 C to trigger flash
Export triggering signal to trigger other remote control
and flash
5 groups (A-E)
16 groups (0-F); 16 groups when the receiver end is
studio flash, which can only be set to M mode in this state
The contrast ration can be set as integral number from
-3 to +3
Custom Function
STBY
BEEP
MIN
LIGHT
SYNC
GROUP
LCD
Function
Sleep
Beeper
Power output
value
Backlighting
time
Sync cord jack
Group
Contrast ratio
of LCD panel
Setting the Flash Trigger
Setting the Flash Trigger
- 21 -
- 20 -
