35
Quadra-Fire • QFI30, QFI35 • 2227-900 Rev. H • 1/11
2225-935B
Log #5 (SRV2225-710)
: Position Log #5 as shown in Figure 12. Mate the middle and left log pins with the two slots located
on the bottom of the log. See Figure 13 for locations of log slots. The smaller end should be pointed toward the right side
of the fi rebox.
Log #6 (SRV2225-706)
: Rest the wide end of the log on the fl at spot of Log #5 as shown in Figure 12 and Figure 14. Place
the narrow end on the fl at spot of Log #2. Flat spot on Log #2 is indicated in Figure 7.
Figure 11. Log #4
Figure 12. Place Log #5
Figure 13. Log #5
Figure 14. Place Log #6
LOG SLOT
FLAT SPOT
FOR LOG #6
MATE LOG
PINS WITH
LOG SLOTS
LOG SLOTS
LOG RESTS
ON FLAT SPOTS
Log #7 SRV2225-704)
: Note the location of the groove on the underside of the log. Place the opposite end on the fl at spot
on Log #3. See Figure 9. Mate the groove on the underside of the log with the grate bar as shown in Figure 15, centered
between the andirons.
LOG GROOVE
MATES WITH
GRATE BAR
LOG RESTS
ON FLAT SPOT
5
7
6
Figure 15. Place Log #7
