Quadra-Fire Explorer II series Скачать руководство пользователя страница 3

August 

13, 

2018     7061-197P 

     

3

Explorer II

Model:

Explorer II Wood Appliance

Laboratory:

Intertek

Report No:

10126132PRT

Type:

Safety

Standard:

UL 1482-07; ULC S627-00

EPA Certification #:

925

EPA Certified Emissions:

2.2 grams per hour

*LHV Tested Efficiency:

78.3 %

**HHV Tested Efficiency:

72.4 %

***EPA BTU Output:

11,200 to 35,900 / hr.

****Peak BTU/Hour 

Output:

61,000

Vent Size:

6 inches

Firebox Size:

2.42 cubic feet

Recommended Wood 

Length:

20 inches

Fuel Orientation:

Side-to-Side

Fuel

Seasoned Cord Wood

* Weighted average LHV efficiency using Douglas Fir 

dimensional lumber and data collected during EPA 

emissions test.

**Weighted average HHV efficiency using Douglas 

Fir dimensional lumber and data collected during EPA 

emissions test.
***A range of BTU outputs based on EPA Default 

Efficiency and the burn rates from the low and high EPA 

tests, using Douglas Fir dimensional lumber.
****A peak BTU out of the appliance calculated using the 

maximum first hour burn rate from the High EPA Test and 

the BTU content of cord wood (8600) times the efficiency.

NOTE:

  This installation must conform with local codes. In the absence of local codes you must comply with the UL1482-

11, UL 737-11, (UM) 84-HUD and NPFA211 in the U.S.A. and the ULC S627-00 and CAN/CSA-B365 Installation 

Codes in Canada. 

NOT APPROVED FOR MOBILE HOME INSTALLATIONS IN CANADA!

The Quadra-Fire Explorer II Wood Appliance (ACC) meets the U.S. Environmental Protection Agency’s crib wood 

emission  limits for wood appliances sold after May 15, 2015. 

This wood appliance needs periodic inspection and repair for proper operation. It is against federal regulations to operate 

this wood appliance in a manner inconsistent with operating instructions in this manual.

Important Safety Information

A.  Appliance Certification

B.  BTU & Efficiency Specifications

Содержание Explorer II series























Отзывы: