15
7095-803C
August 23, 2019
EXPEDITION II INSERT
LOW
OFF
AUTO
HIGH
MANUAL
MANUAL:
Overrides
the internal snap disc
AUTO:
Fan with turn
ON/OFF automatically
and is controlled by the
internal snap disc
MANUAL:
Overrides
the internal snap disc
AUTO:
Fan with turn
ON/OFF automatically
and is controlled by the
internal snap disc
L. Blower Operation
1. Initial (cold) startup:
Push the Start-up Air Control back until it stops. The
blower tends to cool the appliance. Leave the blower
off until the burn is well established, i.e., 30 minutes.
K. Blower Control Box with Snap Disc
1.
The blower will turn on/off automatically when set to
AUTO
(Figure 15.1)
.
2.
When set to MANUAL, the fan will turn on/off only. This
setting over-rides the internal snap disc.
3.
Adjust the speed of the fan by turning the HIGH/LOW
knob to the desired setting.
Figure 15.1
M. Opacity (Smoke)
Opacity is the measure of how cleanly your appliance is
burning. Opacity is measured in percent; 100% opacity is
when an object is totally obscured by the smoke column
from a chimney, and 0% opacity means that no smoke
column can be seen. As you become familiar with your
appliance, you should periodically check the opacity. This
will allow you to know how to burn as nearly smoke-free as
possible (goal of 0% opacity).
NOTE:
For maximum efficiency and lowest emissions,
when operating the blower in either the automatic
or manual setting for the blower off until the burn
is well established, i.e., 30 minutes.
2.
The blower is equipped with five setting switch.
Increase blower speed by turning the setting
knob clockwise.
When burning your first fire, you will experience
smoke and odor from the appliance resulting from the
curing of paint and burning off of any oils remaining
from manufacturing.
Open windows during initial burn to dissipate smoke
and odors!
•
Odors may be irritating to sensitive individuals.
• Smoke detectors may activate.
CAUTION
Figure 15.2
N. Clear Space
•
Do NOT place combustible objects within 4 ft (1.2 m) of
the front of appliance
(Figure 15.2)
.
• Mantel:
Avoid placing candles and other heat-sensitive objects
on mantel or hearth. Heat may damage these objects.
Maintain 4 ft (1.22m) clearance to
combustible in front of appliance
WARNING
Do NOT place combustible objects in front of the
appliance. High temperatures may ignite clothing,
furniture or draperies.
NOTICE:
Do NOT operate a circulating fan within
close proximity, approximately 4 ft (1.2m), of
appliance. Can reverse air flow, blowing hot air
into appliance cavity. Can damage appliance
blower due to overheating.
