background image

1

7095-803C

August 23, 2019

NOTICE: DO NOT DISCARD THIS MANUAL

EXPEDITION II WOOD INSERT

AUTOMATIC COMBUSTION 

CONTROL (ACC)

MODEL(S):

EXPEDITION-II

R

Owner’s Manual

Operation & Care

INSTALLER: Leave this manual with party responsible for use and operation. 

OWNER: Retain this manual for future reference. 

Contact your dealer with questions on installation, operation, or service. 

Installation and service of this appliance should be performed by 

qualified personnel. Hearth & Home Technologies recommends 

HHT Factory Trained or NFI certified professionals.

NOTE:

 To obtain a French translation of this 

manual, please contact your dealer or visit 

www.quadrafire.com

REMARQUE :

 Pour obtenir une traduction française de 

ce manuel, s’il vous plaît contacter votre 

revendeur ou visitez 

www.quadrafire.com

WARNING

Fire Risk.

For use with solid wood fuel only.

Other fuels may over fire and generate 

poisonous gases (i.e. carbon monoxide).

WARNING

If the information in these instructions 

is not followed exactly, a fire may result 

causing property damage, personal injury, 

or death. 

• 

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

• 

Do not over fire

 - If heater or chimney connector 

glows, you are over firing. Over firing will void 

your warranty.

•  Comply with all minimum clearances to combustibles 

as specified. Failure to comply may cause house fire.

HOT SURFACES!

Glass and other surfaces are hot during 

operation AND cool down.

WARNING

Hot glass and appliance will cause burns.

• 

Do not touch glass until it is cooled

• 

Use leather gloves when reloading fuel

• 

NEVER allow children to touch glass

•  Keep children away

•  CAREFULLY SUPERVISE children in same room 

as appliance.

•  Alert children and adults to hazards of 

high temperatures

• 

High temperatures may ignite clothing or other 

flammable materials.

• 

Keep clothing, furniture, draperies and other 

flammable materials away.

Содержание EXPEDITION II





































Отзывы: