7039-174K
17
August 13, 2018
Discovery I
Figure 17.5
Figure 17.1
WARNING!
Use only noncombustible materials as a decorative tile.
B. Decorative Panel Removal & Installation
Your appliance ships with two different side options, one is
a solid side panel
(Figure 17.1)
and tile side panel
(Figure
17.2)
. There are two of each and no left or right side, these
can be changed at anytime.
The appliances are being shipped with a solid side panel
securing clip on both sides. Please remove and discard
pins prior to use
(Figures 17.3)
.
Solid Side Panel Removal
1.
Remove solid panel from side by lifting up and pulling
away from appliance (use a flat tool to pry from bottom
if needed).
Figure 17.4
NOTE:
300 degree F high temp paint can be use to repaint
the solid side panel only!
DO NOT
use on the rest
of appliance this requires 1200 degree F high temp
paint.
Tile Panel Installation
2.
Remove tile frame from side by lifting up and pulling
away from appliance (
Figure 17.4 reference solid
side panel removal).
3.
Stack non-combustible material tiles in tile frame as
shown in
Figure 17.2.
4.
Reattach tile frame
Figure 17.5
.
Tile Dimensional Requirements:
Max Thickness: 5/16”
Max Length/Width: 11-7/8” square
Min Length/Width: 11-11/16” square
1
Figure 17.4
3
Figure 17.2
Securing
Clip
Figure 17.3
