8
02/23
7037-807C
Model
Number:
4300 Step Top
Laboratory:
HRL Technology, Australian Solid Fuel
Testing
Report No:
HCMG/12/016
Type:
Softwood and Hardwood only at 25%
dry basis
Standard:
AS/NZS 2918:2001
The Quadra-Fire 4300 Step Top Wood Appliance is
Hardwood and Softwood Certified. Hardwood Particulate
Emissions equaling 1.0 g/kg with a Space Heating Efficiency
of 64%. Softwood Particulate Emissions equaling 0.4 g/kg
with a Space Heating Efficiency of 71%.
This wood appliance needs periodic inspection and repair
for proper operation. It is against federal regulations to
operate this wood appliance in a manner inconsistent with
operating instructions in this manual.
A. Appliance Certification
B. BTU & Efficiency Specifications
Overall Average Efficiency
Burning Softwood
(AS/NZS 4012)
71%
Overall Average Efficiency
Burning Hardwood
(AS/NZS 4012)
64%
Average Particulate Emission
Factor Burning Softwood
(AS/NZS 4013)
0.4 g/kg
Average Particulate Emission
Factor Burning Hardwood
(AS/NZS 4013)
1.0 g/kg
Maximum Average Heat Output
Burning Softwood
10kW
Maximum Average Heat Output
Burning Hardwood
12.0kW
Wetback
Wetbacks are NOT
an approved option
and must NOT be
fitted.
Vent Size:
6 inches
Firebox Size:
2.3 cubic feet
Recommended Wood Length:
18 inches
Fuel Orientation:
Front-to-Back
Approved Fuel
Softwood and
Hardwood only with a
Moisture content less
than 25% (dry basis)
Improper installation, adjustment, alteration, service or
maintenance can cause injury or property damage.
For assistance or additional information, consult a qualified
installer, service agency or your dealer.
C. Glass Specifications
This appliance is equipped with 5mm ceramic glass.
Replace glass only with 5mm ceramic glass. Please contact
your dealer for replacement glass.
NOTE:
Hearth & Home Technologies, manufacturer of
this appliance, reserves the right to alter its products,
their specifications and/or price without notice.
1
1
Listing and Code Approvals
• Installation and use of any damaged appliance.
• Modification of the appliance.
• Installation other than as instructed by Hearth & Home
Technologies.
• Installation and/or use of any component part not
approved by Hearth & Home Technologies.
• Operating appliance without fully assembling
all components.
• Operating appliance without legs attached (if supplied
with appliance).
• Do NOT Over fire - If appliance or chimney connector
glows, you are over firing.
Any such action that may cause a fire hazard.
Fire Risk.
Hearth & Home Technologies disclaims any
responsibility for, and the warranty will be
voided by, the following actions:
WARNING
Содержание 43ST-ACC-AU
Страница 25: ...25 02 23 7037 807C Date of Service Performed By Description of Service...
Страница 33: ...33 02 23 7037 807C...
