Quadra-Fire 31I-ACC, Руководство по установке, Страница: 22 / 28

22 7044-225B April 9, 2014
31-I ACC
J. Snap Disc and Side Panel Installation
1. Place snap disc box in location shown in
Figure 22.1.
2. Secure the wires through the wire clip to keep in place.
3. Route the blower wires underneath appliance through the
wire channel to the other side of the appliance.
Wire Channel
Blower Wires
Snap Disc Box
Wire Clip
Face Pegs
Side Panel
Screws
4. Tilt the side panel forward under the top and push the
panel onto the pegs on the face.
5. Attach the side panel to the appliance with 2 screws, 1 at
the top and 1 at the bottom on the right side of panel.
6. Repeat for other side once the blower has been installed.
K. Blower Installation
1. Remove top and bottom screw from inner panel.
2. Slide blower mount with blower attached behind the face
and secure with 5 screws provided, 3 on the right side
and 2 on the left.
Figure 22.2
.
3. Connect the blower to the wire harness and secure
through the wire clip.
4. Install left side panel.
Shock Risk .
• Do NOT remove grounding prong from plug.
• Plug directly into properly grounded 3 prong
receptacle.
• Route cord away from appliance.
• Do NOT route cord under or in front of appliance.
CAUTION
Blower
Mounting
Screws
Left Side
Panel Screws
Inner Panel
Wire Clip
Figure 22.1
Figure 22.2