20
7044-225I
August
13,
2018
3100 Insert ACC
Corner Brackets
Figure 20.2
Figure 20.1
Secure 2 Side Surrounds to
Top Surround
Attachment Holes to Outer Can
Figure 20.3
Top Surround
Side Surround
# 8 Screws
F. Surround & Trim Kit Installation
1.
Lay surround face down on a protected surface to
prevent scratching.
2. Using a Phillips head screw driver attach the side
surrounds to the top surround using 2 #8 sheet metal
screws provided with the kit (
Figure 20.1)
.
3.
Lay the trim face down and place the corner brackets
into position.
4.
Using a standard flat screw driver tighten the corner
brackets (
Figure 20.2)
.
5.
Slide the trim over the surround set.
6. Install the surround set and trim set to the outer can.
Secure the top and side surrounds as shown in
Figure
20.3.
G. Installing Firebox into Outer Can
For easier installation, remove the baffle protection
channel, tube channel assembly, baffle board and ceramic
blanket from the appliance before installing into the outer
can. See
Owner’s Manual
for instructions.
1.
Slide the appliance into the outer can. Secure with
Phillips head bolts previously removed from under the
ash lip (
Figure
20.4)
.
2.
Re-install the timer assembly. The timer arm must be
between the first and second control arm tabs (
Figure
20.5).
3.
Attach the timer arm to the timer door.
4.
Test the controls to ensure the timer operates correctly.
Phillips Head Bolts
Figure 20.4
Timer Arm
Timer Door
Control Arm Tabs
Figure 20.5
