2 Front Wheels
Front Brakes
4
9
Brake Adjusters
1. Band adjusters - these
ensure that pressure is applied
evenly, to adjust tighten so that
the wheel can not rotate and
then release evenly until the
wheel rotates freely, lock
adjusters using nut.
2. Cable lock nut clamp - it is
important that the brake cable
is secure at all times and there
is no slack cable.
Check that brakes are balanced and working correctly before using
and after changing the wheel configuration
7. Always ensure that you place a washer
on the axle before the lock nut.
8. For both axles place the lock nut on the axle
and using the spanner ensure that the nuts are
fully tighten. There should be no wobble or
movement sideways. Check Fig. 4
2. The GOLD axle has a reverse
thread so turn anti clockwise to
locate into the cassette.
3. Using the spanner supplied
hold the bearing and using the
wheel turn anti clockwise until
the axle is tight and secure.
THIS IS VERY IMPORTANT.
4. Cable Splitter Adjuster Feral
Check that these are tighten
and use to adjust the cable.
3. Fine Adjuster Feral - there
are two on the front fork and
it is important when adjusting
the brakes that they are
balanced to ensure even
braking
4
3
3
1
1
2
3
Axles and Cassettes
LHT
S
S
S Short Axle - Gold Plated Axle
S Short Axle - Silver Plated Axle
Front Axle Assembly for Four wheels format
Front Cassette and Locking Spanner
6. Place the spanner onto
the fixed end of the cassette and
tighten clockwise (using the wheel will
help) ensure that it is fully tighten as per
Fig. 3 & 4 .
5. Insert second axle on right
hand sides through bearing and
locate into the cassette.
4. Check that the axle is
fully located by ensuring
that only the thread is
visible as shown.
1. Place the cassette with the
bearing as show, it is important
that this is correct as the left
hand side axle that is coloured
GOLD is used.
NB.
Now that you have adjusted the band brakes, test
by rolling the bike forward and apply the brake, if there is
any pull to the left or right adjust the feral to achieve a
balance between the two band brakes.
