Connect the weighing platform
connector
(e)
into the COM PORT
on the back of the mailing system. Then connect the LAN cable
(f)
and power cable
(g)
to each side of the mailing system.
7
Open the cover. Place the meter
(i)
into the meter bay and slide in until
it fits securely into position. Close the cover.
3
Mailing system components:
Mailing
system base
Feeding
table
Catch tray
Weighing platform
LAN cable
Power cable
Meter
Ink cartridge
Unpack all components from the box, remove packaging
and any transit tape.
1
Lift mailing system slightly on the left hand side and align the hooks to attach the
feeding table
(b)
– attach the catch tray
(c)
to the right hand side of the mailing
system.
5
Lower weighing platform release panel at back of
the mailing system. Place weighing platform
(d)
on top of the mailing system and slide forward to
lock. Lift panel to secure and clip cable into place.
Insert the ink cartridge
(h)
at an angle into the mailing system with the
‘TOP’ and ‘LOCK’ stickers facing upwards. Push the ink cartridge
(h)
towards the back of the mailing system until you hear a ‘click’ - close the
cover of the mailing system.
Turn on the mailing system using the switch
behind the power cable
(g)
and follow the steps
on screen.
8
Select LAN and press ‘OK’ to test connection type.
OK
Installation Process
1 LAN
9
OK
Installation Process
Enter your registration code
Next
Installation Process
Press the ‘Next’ to start the
Online service
declaration.
11
Enter your registration code.
10
iX-3 Series
Quick Installation Guide
For more help with your installation, please visit:
Lift the cover of the mailing system to
reveal the ink cartridge
(h)
and meter
(i)
bays.
2
6
4
Mem
Mem
l
Mem
Back of the mailing system
Weighing platform
connector
Follow the steps on screen to complete the
procedure.
