Quadbar Flexi 501, Руководство пользователя

Страница: 2 / 4

2
Mechanical parts drawing Mechanical parts list
Constructed view
Quadbar Fitting Instructions
Strongly recommended Fitting Instructions video https://www.quadbar.com/the-quadbar/fitting-specifications.html
It is recommended that a qualified tradesperson fit a Quadbar, however we recognise that in some circumstances
qualified tradespersons may not be readily available. Therefore, a suitably experienced person with appropriate
mechanical knowledge and experience may fit the Quadbar. Note that a suitable person will be fitting the Quadbar,
details of how to perform some tasks are not described for instance how to correctly and safely cut the tubing. First
read the section
“ Warranty and sales contract ” particularly reading the “ Installer ” section. It is the responsibility of
the person assembling the Quadbar to ensure that fitment of the Quadbar is sound and secure.
It is important to ensure correct tension on the nuts and bolts is achieved . Bolt (16) and Nut (18) Torque setting is
170Nm [125ft-lb]. Bolts (19) (21) and nuts (20) should be “ tightened to the point where there is no slack left in the
bolt ” (i.e. the flanges of the bolt and the nut are just firm against their respective surfaces) then tighten a further ¾ to
# PART DESCIPTION QTY
1 FLEXI01 FLEXI JOINT ASSEMBLY 1
2 M815GS M8 SET / GRUB SCREW 4
3 FMS01 MAIN STRUCTURE 1
4 FUS01 UPPER STRUCTURE 1
5 FBT01 BOTTOM INNER TUBE 1
6 FNB10 10 x 16 NYLON BUSH 2
7 FUMP01 UPPER MOUNT PLATE 1
8 FRET01 RETAINER PLATE 1
9 FNB50 MAIN NYLON BUSH 1
10 STI 01 STIFFENER PLATE 2
11 UB1028 M10 HT U-BOLT 2
12 M10NN M10 NYLOCK NUT 4
13 M820HT M8 HT BOLT 20mm 2
14 M08NN M8 NYLOCK NUT 2
15 FLMP01 LOWER MOUNT PLATE 1
16 3/4HT2 3/4 HT BOLT UNF 60mm 1
17 SW3/4 ¾ SPRING WASHER 1
18 NUT 3/4 ¾ UNF NUT 1
19 M1080HT M10 HT BOLT 80mm 1
20 M10NN M10 NYLOCK NUT 2
21 M1065HT M10 HT BOLT 65mm 1
WPLATE Warning PLATE 1
FP501 FOAM PADDING 1
HB501 HAND BOOK 1