manualshive.com logo in svg

QUAD C4 - REV 1, Инструкция пользователя, Страница: 8 / 14

Поделиться
Скачать
QUAD C4 - REV 1 Скачать руководство пользователя страница 8

STEP 9

STEP 10

8

Step 

Remove the screws holding the terminal cover plate and then  

remove any knock outs needed to connect the speaker wiring. 

Step 8

Select the appropriate impedance using the push-button switch 

inside the terminal box if the speaker is part of a low impedance 

system (except C4T and C4-16).

Step 9

Lift the entire assembly to the ceiling and terminate the wiring to 

the terminal strip. Replace the cover plate and screws.

Step 10

Place the assembled speaker and ceiling tile into the ceiling grid, 

ensuring that the mounting rails are resting correctly on the grid.

Step 11

Set the correct wattage tap (except C4-16) using the front mounted 

rotary power switch. NOTE: The switch is labeled for both 70V 

and 100V power taps; ensure you select the correct tap for the 

connected amplifier.

Step 1

If the speaker bezel is to be painted, place the supplied clear plas-

tic paint cover over the front. Otherwise, attach the grille restraint 

tether by inserting the plastic plug into the hole on the inside of 

the bezel and then seat the grille to the bezel by pushing firmly 

around the perimeter of the grille.

Содержание C4 - REV 1















Отзывы:

Нет отзывов