11
10. Blend Knob
Controls the amount of blend between the four algorithms emitted from the
Blend
Output.
If the knob is far left, the first LED will be illuminated and the
Smooth
algorithm will be
selected.
If the knob is far right, the fourth LED will be illuminated and the
Blend
algorithm will be
selected.
11. Blend CV:
Control voltage input for the amount of blend between algorithms.
Range: ±5V
12. Coin Toss Button:
Button that, when pressed, will reseed random values for the
Smooth, Discrete,
Wavetable, Blend, Burst, Digital Noise
and
Rhythm Outputs.
It is important to note that pressing the
Coin Toss Button
will only cause gate signals
to emit from the clock output while
Freeze
is enabled.
13. Rate Knob:
Sets the rate of the internal clock, the rate at which the
Smooth
algorithm changes,
and the rate and density of the gate signals present at the
Burst Output.
If the knob is far left, the rate of the internal clock will be as slow as possible.
If the knob is far right, the rate of the internal clock will be as fast as possible.
If the knob is far left, the rate at which the
Smooth
algorithm changes will be as slow
as possible.
If the knob is far right, the rate at which the
Smooth
algorithm changes will be as fast
as possible.
If the knob is far left, the rate and density of the gate signals present at the
Burst
Output
will be as slow and sparse as possible.
If the knob is far right, the rate and density of the gate signals present at the
Burst
Output
will be as fast and condensed as possible.
The internal clock rate has a range of 15 seconds between pulses to 50Hz.
