150.550UK User Manual
Please read through this manual thoroughly before use,
any damage caused by misuse of the product will not be covered by the warranty.
Safety Instructions
•
Please keep this manual for future reference.
•
Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is
not higher than that stated on the bottom of the fixture.
•
This product is intended for indoor use only. It must be connected to an earthed mains outlet.
•
To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials
close to the unit while operating.
•
The unit must be installed in a location with adequate ventilation, at least 20cm from adjacent surfaces. Be sure that
no ventilation slots are obstructed.
•
Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse size
and type.
•
Maximum ambient temperature is 40°C. Do not operate the fixture at higher temperatures.
•
In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself.
Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorised
technical assistance centre.
•
Make sure the power cord is never crimped or damaged.
•
Never disconnect the power cord by pulling or tugging on the cord.
•
Avoid direct eye exposure to the light source while it is on.
The Windmill is part of the next generation of QTX moving lights. It features twin axis heads with continuous 360°
rotation in both directions. The Windmill uses 6 LED lenses that project clear, crisp beams of light. Being compact makes
it ideal for the mobile DJ or as part of an installation. The Windmill comes with 3 different operating modes; sound-to-
light, 8 built-in show modes and DMX which can be used to create your own lighting show.
•
Twin axis moving heads each with 3 lenses
•
360° continuous rotation in both vertical and horizontal plains
•
Auto, sound-to-light, DMX or master/slave controls
•
RGBW colour mixing in DMX mode
•
8 built-in light show programs
•
We recommend that this product is used within the guidelines HSG95
Specifications
Power supply
100-240Vac 50/60Hz
Fuse
F2A
LED power
6 x 10W 4-in-1 LED's (RGBW)
Beam angle
5°
Power connection
IEC In & Out
Power consumption max.
72W
Max. in daisy chain
8
DMX channels
21 or 28
Dimensions
210 x 189 x 302mm
Weight
3.3kg
LED safety standard
BSEN62471:2008
