151.553UK User Manual
Master/slave operation
A Stage Bar fixture operating in one of the standalone modes may be connected onto further Stage Bar units
by DMX lead (XLR-XLR) as a master unit.
The slave units must be set to “
” mode to mimic the operation of the master unit.
When slave mode is selected, the Stage Bar slave(s) will mimic any DMX input from another Stage Bar
operating in standalone Auto or Sound activated mode.
DMX operation
In order to access the DMX functions, the DMX start address will need to be set on the control panel.
When the display shows “
”, this means that the
Stage Bar is operated starting from DMX address 1.
When the display shows “
”, this means that the
Stage Bar is operated starting from DMX address 203.
The start address can be anywhere between 001 and 512
The re are 2 DMX channel modes with either 3 or 12 DMX channels occupied for basic or advanced control.
DMX channel assignments in the 2 different modes are shown below (CH1 = start address)
DMX: 3 channel mode
CH1
000-009
Black Out
010-039
Auto program 1
All effects on
040-069
Auto program 2
PAR cans only (colour jump)
070-099
Auto program 3
PAR cans + LED fi laser
100-129
Auto program 4
PAR cans + LED fi laser + strobe
130-159
Auto program 5
PAR cans + LED fi laser + UV
160-189
Auto program 6
PAR cans + LED fi UV
190-219
Auto program 7
PAR cans + laser + UV
220-249
Auto program 8
LED fi laser + UV
250-255
Auto program 9
Strobe only
CH2
000-009
Black Out
010-089
Sound activated program 1
Sound activated version of Auto program 1
090-169
Sound activated program 2
Sound activated version of Auto program 4
170-255
Sound activated program 3
Sound activated version of Auto program 8
CH3 000-255
Speed / microphone sensitivity
