151.553UK User Manual
Rear panel
Internal Settings
Using the four function buttons on the rear panel of the bar, the Stage Bar can be set to various modes.
Press the MENU button to display the different functions (see table below). Use the UP/DOWN
arrow buttons
to make your selection and press the ENTER button to confirm the selection.
MENU UP/DOWN
Description
ENTER
Description
***
-
DMX start address 001 - 512
**
-
Auto sequence programs 1 - 9 (
= strobe)
.
-
.
Speed 1 - 32
**
-
Sound activated programs 1 - 3
**
-
Sound activated microphone sensitivity 1 - 9
Slave mode
Standalone operation
The Stage Bar can be operated without external control by selecting one of the auto sequence programs or
sound activated modes from the control panel menu. These are Shown in the Internal Settings section
above.
Internal settings can also be selected via the included IR remote control as detailed below.
As supplied, the remote handset has a clear plastic tab inserted which should be removed to activate the
CR2025 button cell. Point the handset toward the front of the Stage Bar unit at a range of no more than 5m
for remote control.
1 IEC mains inlet & fuse holder
5
LED display
2 DMX input XLR
6
MENU buttons
3 DMX output XLR
7
Microphone
4 UV/Strobe bar connection
